Westin HDX Punch Plate Grille Guard Installation - 2020 Ford F-250 Super Duty- Video
Hello neighbors, it's Brad here at etrailer. And today, we're taking a look and installing the Westin HDX Grille Guard on a 2020 Ford F-250 Super Duty. Now, it's available in two different colors. Here we have our black powder coat finish, it looks really good. But there's also a polished stainless version. So, depending on, kinda, the look you're going for on your truck, you can pick between those two colors. more
9/26/2022 3:00:50 PM
Pilot Bully NR-Series Stainless Steel Bull Bar Installation - 2005 Ford F-250- Video
Speaker 1: Today on our 2005 Ford F250 Super Duty we're going to be taking a look at and showing you how to install the Bully NR Series Stainless Steel 3 inch Bull Bar with Skid Plate. Part number NR-304. This is what our Bully Bar looks like when it's installed. As you can see, it's constructed of a nice 3 inch in diameter stainless steel tubing. It's going to be a chrome polish. It's also going to have a skid plate that is removable.Now, this is going to be also good for mounting lights on. more
1/11/2018 4:02:45 PM
Westin Sportsman Grille Guard Installation - 2003 Ford Explorer Sport Trac- Video
Today on our 2003 Ford Explorer Sport Trac we're going to take a look at and also show you how to install the Westin Sportsman Grille Guard. This one-piece grille guard offers a black powder coating on a steel frame. The Part Number is 40-0805. This is a very rugged brush guard. It gives a superior protection. It's going to protect from dents on maybe our bumper or our hood, our grill, our headlight areas, just to give us superior protection whether it's from brush that may come up and rub our vehicle while we're offroad or other hazards that we can sometimes find running across the road. You see the smaller bars here. These are going to give us full headlight protection without hampering our headlight performance and they're very easily removable. more
11/23/2016 1:02:55 PM
Westin Sportsman Grille Guard Installation - 2006 Ford F-150- Video
Today on our 2006 Ford F-150 4WD, we'll be installing the Westin Grille Guard part number 40-2015. Note the install for this application will be similar to a 2WD but we'll be following the 4WD install procedures. To begin we'll need to remove the manufacturer's tow hook. There's two. One on each side and each one is held in with two fasteners. We'll remove the fasteners and the tow hooks. Now after we remove the tow hook and fasteners, we'll go ahead and pull the old nut plate out of the frame that held the fasteners tight. more
10/2/2014 11:52:30 AM
Westin Off-Road Driving Lights Installation - 2006 Ford F-150- Video
Today on our 2006 Ford F-150, we'll be installing the Westin Off Road Driving Lights, part number 09-0505. We're going to mount these on the Westin Sportsman Grille Guard that has already been installed on the truck. To begin our install, our grille guard has mounting points for the lights already. We'll go ahead and locate the attachment points and remove the rubber plugs. Now to secure the light to the bar, the stud will go down through the light bar, then we'll install a flat washer, a split lock washer and secure with a nut. Let's go ahead and set out light in place and then we'll install our hardware. There's our flat washer, our split lock washer and then the nut. With our hardware finger tight, we'll make any necessary adjustments to the light and then tighten it down. more
9/17/2014 12:05:23 PM
Westin Driving Lights Installation - 2006 Ford F-150- Video
Today in our 2006 Ford F150, we'll be installing the Westin driving lights. Part number 09-0205. On this vehicle we'll be installing the lights onto the Western light bar, part number 37-02015. We'll be installing four lights in total. Let's go ahead and mount our lights first. To mount the light, we'll simply remove the nut and lock washer, install the light on the light bar and then reinstall the lock washer and then the nut and then tighten them down. more
10/23/2012 2:41:19 AM
Westin Off-Road Light Bar Installation - 2006 Ford F-150- Video
Today on our 2006 Ford F150 well be installing the Westin Light Bar, part number 37-02015. Since this vehicle is equipped with manufacture tow hooks, well need to remove those first. As per the instructions, we can reuse the manufacturers hardware. Well go ahead and remove the two tow hooks. There are two fasteners for each tow hook. Note, the fastener secured to a nut plate in the frame. more
10/22/2012 9:44:20 PM
Filter Videos
Filter Videos
